Hastelloy C276 tubing | Nickel Alloy C276 tubing-Nickel alloy tube manufactuer & Supplier

Hastelloy C276 tubing is a kind of typical nickel alloy tube, it is the seamless or welded tubing made of nickel alloy grade Hastelloy C276, which is a nickel-molybdenum-chromium alloy with addition of tungsten, and it is the same as alloy C276. 

As one of the mature nickel alloy tube suppliers & manufacturers, Younglee can manufacture C276 tubing with O.D 6 mm to 50.8 mm.

Hastelloy C276 tubing Standards

Younglee’s Hastelloy C276 seamless pipes are produced according to popular standards as below: ASTM B622, ASME SB622, ASTM B622, ASME SB622. 

We also supply C276 tubing upon customers’ specifications.

Hastelloy C276 tubing Size

We produce and supply Hastelloy C276 tubing in metric sizes and imperial sizes, size range as below.

O.D 6 mm – 50.8 mm,  W.T 0.5 mm – 6 mm

Alloy C276 tubing Material Composition (wt%)

ElementCSiMnPSCoFeCrCuMoVNi
Min414.5315Balance
Max0.020.0810.030.32.5716.54.5170.35

C276 tubing Mechanical Properties

Heat treatmentBright Annealed
Tensile Strength Rm100ksi (min)
Tensile Strength Rm690MPa (min)
R.p. 0.2% Yield41ksi (min)
R.p. 0.2% Yield290MPa (min)
Elongation (2” or 4D gl)40% (min)

Alloy C276 tubing / Hastelloy C276 tubing Advantages

C276 tubing has excellent corrosion resistance in a broad range of extreme environments. Due to the high molybdenum content, C276 alloy especially has good performance on resistance to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. 

Monel Tubing| Monel 400 tubing| Monel 400 pipe-Monel tube suppliers

Monel Tubing Brief Introduction

Monel tubing usually refers to Monel 400 tubing, because Monel 400 is the most famous and popular nickel alloy of the Monel series. Younglee manufacturers and supplies high quality Monel 400 tubing / Monel 400 pipe with sizes and requirements upon customer’s requests.

Monel 400 tubing is widely used in many industrial areas, especially in the industries of marine and chemical processing.

Monel Tubing /Monel 400 tubing / Monel 400 pipe Sizes

As one of the first class quality monel tube suppliers & manufacturers, Younglee produces and supplies various different sizes of monel tubing /monel 400 pipe.

Size range: O.D 6 mm – O.D 50 mm

Here below are some popular dimensions of Monel 400 pipe:

  • Mertic size: O.D 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 22mm, 25mm, 28mm, 30mm
  • Imperial Size: O.D 1/4″, 5/16″, 3/8″, 1/2″, 3/4″, 1″, 1-1/4″

Other dimensions are available upon customer’s request.

Monel 400 Tubing Chemical Composition

Nickel min.CopperChromiumIronSulfurCarbonManganeseSilicon
6328.0-34.020.0-23.02.50.0240.320.5

Monel 400 Tubing/ Monel 400 pipe Mechanical Properties

Heat treatmentBright Annealed 
Tensile Strength (Rm)70ksi (min)
Tensile Strength (Rm)480 MPa (min)
R.p. 0.2% Yield28ksi (min)
R.p. 0.2% Yield195MPa (min)
Elongation (2” or 4D gl)40% (min)

Monel 400 tubing / Monel 400 pipe Typical Applications 

Monel 400 pipe / Monel 400 tubing is  broadly used in industries of Chemical processing, Oil and gas, Nuclear and Power, for the advantages of high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.

And here below are some typical applications of monel 400 tubing:

  • Heat exchangers
  • Steam Generators
  • Reboiler tubes
  • Nuclear core cooling tubes
  • Brine heaters and evaporator bodies in salt plant
  • Sulphuric and hydrofluric acid alkylation plant acids
  • Control lines

Inconel Tubing| Inconel 625 tubing| Inconel 600 tubing-China manufacturer & supplier

Inconel tubing brief introduction

Inconel tubing of Younglee is seamless tube made of inconel alloys, which are nonmagnetic, high corrosion resistant, heat resistant and oxidation resistant, nickel-based alloys.

Inconel tube has high strength and toughness in the extreme high temperature applications. And Inconel alloys have excellent fatigue strength and stress-corrosion cracking resistance to chloride ions, so nickel alloy inconel tubing is suitable for conveying various solutions containing Cl and caustic soda with concentration <70% and many other fluids.

As one of the first class inconel tubing suppliers and manufacturers in China, Younglee manufactures inconel pipes with size range O.D 5 mm – 50.8 mm in most popular inconel alloys, including inconel 600, inconel 625 and inconel 718.

Inconel tubing main series

Here below are details of the main three series of inconel pipe /tubing our factory supplies:

Inconel 625 tubing

We are one of the leading quality inconel 625 tube suppliers in China, our inconel 625 tubing is focused on small metric tubes sizes and imperial sizes.

Inconel 625 tubing sizes

Our nickel alloy inconel tube factory mainly produces inconel 625 tubing with size range O.D 6 mm – 50.8 mm. Here below are some popular sizes.
  • Inconel 625 pipe imperial sizes: OD 1/4″ x WT 0.035″,  3/8″ x 0.035″, 1/2″ x 0.035″, 1/2″ x 0.049″, 5/8″ x 0.035″, 5/8″ x 0.049″, 3/4″ x 0.065″, 5/16″ x 0.035″, 5/16″ x 0.028″;
  • Inconel 625 tube metric sizes: OD 6mm x WT 1mm, OD 8mm x WT 1mm, OD10mm x WT 1mm, OD 12mm x WT 1mm, OD 15mm x WT 1mm, OD 16mm x WT 1mm

Inconel 625 pipe standards 

We manufacture and supply inconel 625 pipes with most popular standards as below. 

  • US /ASTM Standards: ASTM B444, ASTM B751, ASTM B829, ASTM B704, ASTM B705, ASTM B755, AMS 5581
  • ISO and other standards: ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751, WERKSTOFF Nr 2.4856

Inconel 625 tubing chemical composition

Here below is the chemical composition of inconel pipe 625:
C% Max.Si% Max.Mn% Max.P% Max.S% Max.Al% Max.CrCuFe% Max.MoNbTi% Max.Ni
0.10.50.50.0150.0150.420 -231.0-1.458-103.15-4.150.4Balance

Inconel 625 is known as Alloy 625 also, so our alloy 625 tubing actually are with the same chemical composition as above.

Inconel 625 tubes mechanical properties

Heat TreatmentAnnealed (Grade1)Solution-treated (Grade 2)
Tensile Rm827MPa (min)690MPa (min)
R.p. 0.2% Yield414MPa (min)276MPa (min)
Elongation (2” or 4D gl)30% (min)30% (min)

Inconel 625 is known as Alloy 625 also, so our alloy 625 tubing actually are with totally the same mechanical properties as above chart.

Inconel 600 tubing

As one of the professional inconel 600 tube suppliers in China, we produce and sell inconel 600 tubing to our customers in many countries.

Inconel 600 tubing dimensions

Our factory produces inconel 600 tubing with various sizes upon customers’ request. Here below are some popular sizes.
  • Inconel 600 tubing imperial dimensions: OD 1/4″ x WT 0.035″,  3/8″ x 0.035″, 1/2″ x 0.035″, 1/2″ x 0.049″, 5/8″ x 0.035″, 5/8″ x 0.049″, 3/4″ x 0.065″, 5/16″ x 0.035″, 5/16″ x 0.028″;
  • Inconel 600 pipe metric dimensions: OD 6mm x WT 1mm, OD 8mm x WT 1mm, OD10mm x WT 1mm, OD 12mm x WT 1mm, OD 15mm x WT 1mm, OD 16mm x WT 1mm

Inconel 600 pipe standards 

We produce and sale inconel 600 pipes with various popular standards as below. 

  • ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163
  • BS 3074, BS3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe
  • Other specifications upon customer’s request.

Inconel 600 tubing / alloy 600 tubing chemical composition (wt%)

Nickel min.ChromiumIronCopperSulfurCarbonManganeseSilicone
7214.9-17.06.0-10.00.50.0150.1510.5

Inconel 600 tubes / alloy 600 tubing mechanical properties

Heat treatmentAnnealed
Tensile Rm110ksi (min)
Tensile Rm738MPa (min)
R.p. 0.2% Yield37ksi (min)
R.p. 0.2% Yield255MPa (min)
Elongation (2” or 4D gl)45% (min)

Inconel 600 tubing is known as alloy 600 tubing also, because Inconel 600 is the same as alloy 600. The chemical composition and mechanical properties are the same.

Inconel 718 tube

Inconel 718 tube is an important inconel tube made of nickel-chromium alloy. Our inconel pipe can be heat-treated to give high strength, good corrosion resistance, ease of formability and which can be welded with good resistance to strain age cracking. The inconel pipe can be used at temperatures up to 700ºC.

As one of the leading inconel tube suppliers and manufacturers in China, we also produce and sell inconel 718 tube to our customers home and abroad.

Inconel 718 tube sizes

Our factory manufactures inconel 718 seamless tubes with a wide range of dimensions upon customers’ request.
 

Inconel 718 pipe standards 

We produce and sale inconel 718 seamless tube with various popular standards as below. 

  • AMS 5589, AMS 5590
  • WERKSTOFF Nr 2.4668
  • Other specifications upon customer’s request.

Inconel 718 tube chemical composition (wt% max.)

NiCrFeMoNbAlTiSCMnSiPBoron
50.0-55.017.0-21.08.57.0-9.52.75-4.00.0351.0-1.70.010.030.0350.350.0150.006

Inconel 718 pipe mechanical properties

Heat TreatmentSolution-annealed
Tensile Rm155ksi (min)
Tensile Rm1069MPa (min)
R.p. 0.2% Yield95ksi (min)
R.p. 0.2% Yield655MPa (min)
Elongation (2” or 4D gl)30% (min)